The GardePro SP350 is the ultimate accessory for any GardePro camera. Featuring a built-in lithium battery pack means you’ll never need to buy disposable batteries for your GardePro cameras again!

Features multi-voltage output (6V / 9V / 12V) for maximum compatibility. Simply switch to the correct voltage to suit your security camera.

Installation Instructions:

1. Fully charge the built-in lithium battery before using the solar panel for the first time.
2. Install solar panels in a location that does not experience constant shading.
3. In the northern hemisphere, panels should ideally face south, while in the southern hemisphere, panels should ideally face north.
4. Sunlight intensity varies with weather and seasons, so adjust the solar panel's orientation in real-time for maximum sunlight exposure
5. Tilt the panel slightly to avoid leaves, water, or dust on its surface. Regularly clean the panel to remove fallen leaves, dust, and rain marks to prolong its service life.
6. If panels are installed in areas with heavy snow, extreme cold, or strong winds, take proper measures to ensure reliability and safety.
7. Avoid prolonged exposure to saltwater and do not submerge in salt or fresh water.

Compatible with GardePro Trail Cameras:

GardePro A3, A3S, E5, E5S, A5, A5CF, A50, T5NG, T5CF, T5WF, T5NG Pro, T5CF Pro, T5WF Pro, A60, E6, E6P, E6PMB, E6PCF, E7, E8, E8P, E8PMB, E8PCF, E8PWF, E8 2.0, E8 2.0 Pro, E9, E9P, E9PMB, E9PCF, E9PWF, E9 2.0, E9 2.0 Pro, A80, A80 Pro, R3 Pro, X20, X20WF, X20CF, X50, X50S, X60, X80

Please ensure to use 6V only out put on E8 trail cameras.